The IDEAL 61-757 Tight Sight clamp Meter is a CAT IV 600 CAT III 1000-Volt rated auto ranging true root mean square (TRMS) digital clamp meter that measures up to 600 Amp AC and DC current via the clamp head. It measures up to 1000-Volt AC and DC， Low impedance AC voltage (Lo Z) (to reduce the possibility of false readings due to ghost voltages)， frequency， resistance， continuity， capacitance， and diodes via test-leads (included) and measures temperature (F/C) via a K-Type thermocouple (included). It's capable of detecting the presence of voltage between 40-Volt to 600-Volt via a non-contact sensor in the right tip of the clamp. The patented Tight Sight LCD display， located on the bottom of the unit， enhances safety and productivity by displaying a secondary reading at the end of the meter， eliminating the need to bend or twist conductors or place you head near the panel in order to see the main meter display. Both displays can be backlit， and a built-in flashlight can be illuminated when working in poor or zero lighting conditions. The unit uses an illuminated red LED in the center of the meter and emits audible tones to notify when voltage is above 30-Volt， when continuity is detected and when the NCV senses voltage within its set range. The clamp head has a built-in probe tip holder on the backside of the right clamp to allow measurements holding the clamp in 1 hand and the second lead in the other hand.

UL certified CAT IV 600 CAT III 1000-Volt， measures 0 Amp to 600 Amp AC/DC and 0-Volt to 1000-Volt AC/DC

Patented tight sight display eliminates the need to bend or twist conductors or place your head near or in the panel and allows you to easily read the bottom display when taking measurements

Provides true RMS AC voltage and current for accurate measurements on non-linear signals

Measures AC/DC current， AC/DC voltage， frequency， resistance， continuity， capacitance， diodes， temperature， low impedance AC voltage (Lo Z) (to reduce the possibility of false readings due to ghost voltages)， and senses AC voltage

Built-in probe tip holder and hanging strap clip allows safer， easier measurement

Built-in flashlight and dual backlit displays， allow for safer/faster work in poorly lit environments

Over molded industrial design enhances gripping and allows the meter to withstand a 6.6 ft. (2 m) drop

Includes soft case， test leads， batteries， and K-type thermocouple