Not a plug-in model， this electric baseboard heater and wall thermostat combination require a hard-wire installation which is a permanent， safe and reliable heating solution

Requires 240-Volt or 208-Volt wiring (double breaker). Before you purchase， confirm your power supply voltage (check your breaker， use a voltmeter， or refer to your old heater’s label if replacing)

Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)

Large 2，000-Watt heater effectively warms up to 250 sq. ft. (medium to large-sized rooms)

2，000-Watt output with 240-Volt wiring (8.3 Amps， 6，825 BTUs) or 1，500-Watt output with 208-Volt wiring (7.2 Amps， 5，120 BTUs)

Place baseboard directly on the floor， mount to wall and maintain 12 in. clearance from furniture， drapes， etc. Do not install below electrical outlets

Double pole (4-wire) mechanical thermostat controls up to 5280-Watt at 240-Volt or 2640-Watt at 120-Volt

Thermostat setpoint range: 40°F to 80°F (5°C to 27°C)， comfort range: 3° to 6°

Thermostat controls up to 5280-Watt at 240-Volt or 2640-Watt at 120-Volt

A high-temperature safety device switches heater off if normal operating temperatures are exceeded

UL listed in the US for safety compliance

Lifetime limited warranty

Thermostat comfort range: 3° to 6°

22 Amp thermostat

Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker， use a volt meter， or look at the voltage on your old heaters label if replacing